Case Studies

wilmott-dixon
CustomerWilmott Dixon
SectorEducation
Building UsageMini Bus Garage
ClientBankview & Redbridge School
Architect/ProjectUnknown
what we did...
Midbrook’s brief on this job was to supply the steel framework and insulated roof cladding. All the walls were constructed from brickwork and completed by others. Midbrook complied with all Health & Safety responsibilities as requested by the main contractor.


 

capital-compactors
CustomerCapital Compactors
SectorIndustrial
Building UsagePaint Spray Booth
ClientCapital Compactors
Architect/ProjectMidbrook Design Team
what we did...
Midbrook were contracted to carry out the submission of the planning application on behalf of our clients and submission of building control. We constructed a reinforced concrete raft including a 3m square pit, followed by the supply & fit of steelwork and insulated cladding. Internal work involved included internal blockwork, fire boarding and internal first and second fix joinery.


 

kk-toiletries
CustomerKK Toiletries
SectorCommercial
Building UsageStorage
ClientKK Toiletries
Architect/ProjectMidbrook Design Team
what we did...
After carrying out a site survey in February 2015, we were contracted to offer a total project management package. From submission of a planning application and organising the discharging of conditions, Midbrook commenced work on site late Summer in 2015. The reinforced slab was constructed and the main framework and cladding work completed, internal fire-boarding work and external drainage works completed to our client’s satisfaction.


 

ap-metalising
CustomerAP Metalising
SectorIndustrial
Building UsageStorage
ClientAP Metalising
Architect/ProjectMidbrook Design Team
what we did...
Midbrook were employed to carry out the groundworks, supply and fit of the main frame and cladding, together with a mezzanine floor and fireboarding. The project was completed during the summer of 2015, and was completed within a tight programme.


 

phart
CustomerP Hart Fencing
SectorUtilities
Building UsagePlant & Machinery Storage
ClientEnvironment Agency
Architect/ProjectMidbrook Design Team
what we did...
A slightly different project for Midbrook to take on, we were asked to supply a roof covering spanning over existing concrete walls. After consultation with our design team we delivered a large canopy to cover the plant and machinery underneath. In addition to this we also supplied a groundworks package and an L shaped storage building on the same site. Another building supplied to our customers satisfaction.


 

bookham-rifle
CustomerBookham Rifle Club
SectorCommunity
Building UsageClubroom & Rifle Range
ClientBookham Rifle Club Direct
Architect/ProjectMidbrook Design Team
what we did...
Midbrook were contracted to carry out the groundworks and the supply and fit of the steelwork and cladding. Working to a very bespoke design and experiencing difficult access issues to the site, Midbrook’s experienced team managed to complete the project under challenging circumstances to a high standard and within the quoted figure.


 

bulwell
CustomerBulwell Precision Engineering
SectorIndustrial
Building UsagePaint Spraying, Offices and General Warehousing
ClientGAB
Architect/ProjectMidbrook Design Team
what we did...
Midbrook were instructed to offer our client a full turnkey solution, including construction of a reinforced raft foundation and yard area. The supply & fit of the main steelwork, mezzanine steelwork and cladding formed part of the contract. Mechanical & Electrical work was sub-contracted to Arc Mechanical and Midbrook carried out internal first and second fix joinery, plastering, ceiling and flooring work.


 

poole-harbour
CustomerPoole Harbour Canoe Club
SectorCommunity
Building UsageCanoe Storage & Meeting Room
ClientPoole Harbour Canoe Club
Architect/ProjectAdam Covell
what we did...
Midbrook were employed by the canoe club to supply and fit a bespoke designed steel framed building measuring approx. 8m x 21 including a full length mezzanine floor, insulated roof and an attractive vertical larch fire retardant cladding.


 

sng-barrett
CustomerGAW Building Limited
SectorManufacturing
Building UsageWarehousing
ClientSNG Barrett
Architect/ProjectN/A
what we did...
Working as a sub-contractor a local building company, Midbrook supplied and fixed an 18m x 28m x 4.2m to the eaves fully insulated building including rollershutters, pa doors and rainwater goods. Concrete slab design and construction by others.


 

rhf-fans
CustomerRHF Fans Ltd
SectorIndustrial
Building UsageStorage
ClientRHF Fans
Architect/ProjectMidbrook Design & Build
what we did...
Our client had an urgent requirement at their premises for an additional covered storage facility. Constructed on the existing concrete yard area in Manchester. The building dimensions were 15m span x 30m x 4.5m to the eaves, clad with a single skin cladding, this project was completed within a 2 week construction period.


 

esl-fuels
CustomerESL Fuels Limited
SectorOil & Gas
Building UsageStorage Facility
ClientESL Fuels Limited
Architect/ProjectMidbrook Design & Build
what we did...
Our brief was to construct a reinforced raft foundation for our client and to supply a robust storage facility, measuring 8m x 15m x 4.3m to the eaves with a rollershutter door and personnel door.


 

CustomerGuildford Archery Club
SectorCommunity
Building UsageArchery
ClientGuildford Archery Club
Architect/ProjectSports England - Inspired facilities project
what we did...
Our brief was to carry out the groundworks, including a reinforced raft foundation and pathway, liaise with building control, and to supply & fix a single skin building for the archery club. Building dimensions were 7.2m x 12.5m with mono pitch roof design. Internal works and fit out were done by others.


 

lubet-extension
CustomerLubet Engineering Ltd
SectorIndustrial
Building UsageFactory Extension
ClientPerkins Engines
Architect/ProjectMidbrook Design & Build
what we did...
Our brief was to provide a pad foundation design and to provide brickwork at the bottom of the building. The building was a lean-to structure adjoining one of the main factory buildings, dimensions 10m x 22m x 6.5m to the eaves with a mono pitch.


 

victor-sarah-crew
CustomerVictor & Sarah Crew
SectorPrivate
Building UsageDouble Decker Bus Storage Building
Architect/ProjectClient Design/Midbrook Build
what we did...
We were approached to build an American barn style construction, with a steel portal frame design, brickwork and a larch wood cladding and a tiled roof. A bespoke design project with attention to detail was paramount.


 

wilsdon-pension-trust
CustomerWilsdon SIPP Fund
SectorPortable Buildings
Building UsageFactory/Workshop
ClientBritcab
Architect/ProjectMidbrook Design & Build
what we did...
We were commissioned to supply an 18m x 27.5 x 5m to eaves fully insulated steel framed building. We also provided the groundworks for the project and an additional concrete yard area 7m x 27m and affiliated foul and rainwater drainage requirements.